Sew a Picnic Basket

Sew a Picnic Basket

The bag requires two squares of outer and lining fabric, two squares of interfacing, plus two rectangles for the handles.

Emily goes over the best type of interfacing for this project, plus practical tips for adhering fusible interfacing to the fabric.

Stitch

Fold each handle rectangle in half lengthwise with right sides together. Stitch one short edge and the long edge. Clip the corners, then turn right side out and press.

Stitch the outer squares together along three edges. Repeat for the lining fabric, leaving an opening along the lower edge for turning.

Emily demonstrates an easy way to press open seam allowances on 3D objects, to avoid putting unwanted creases anywhere else in the bag.

To box the corners, align the side and lower seam, creating a triangle on the corner. Mark a 6” line across the corner. Stitch along the line and cut off the excess. Repeat for the remaining corner and each lining corner.

Turn the outer bag right side out. Center one handle over one side seam, aligning the raw edges; pin or tack. Repeat for the remaining handle on the opposite bag side seam.

Insert the outer bag inside the bag lining with right sides together, aligning the side seams. Stitch the bag upper edge, catching the handles in the stitching. Turn the bag right side out through the lining opening. Edgestitch the opening closed. Tuck the lining inside the outer bag.